Print Workflow
Q. How Many Sheets Can I Load Into a Paper Tray?
A. The maximum number of loadable sheets varies depending on the target paper tray or paper type.
For details, refer to Optional Part Names and Specifications for Paper Feed.
Q. Is There a Method to Print a Print Job You Do Not Want Other People to See?
A. Yes, there is.
Secure Print is useful to print a highly confidential job. For details, refer to [Secure Print].
Q. Is There a Function for Checking the Finishing of a Sample Output or Trial Printing?
A. Yes, there is.
Selecting [Print Mode] in the [Workflow] tab of PS Plug-in Driver allows you to print only 1 copy and check the result, or hold data in this system before printing. For details, refer to [Print Mode].
Q. Can I Overprint a Watermark and an Image?
A. Yes, you can.
Use [Form] of PS Plug-in Driver or [Forms] of Print Manager.
For details about [Form] in PS Plug-in Driver, refer to What Is the [Forms]?.
For details about [Forms] in Print Manager, refer to [Forms].
Q. Can I Save the Printed Data in the HDD of the Machine?
A. You can save the copied or scanned data. Only the jobs scanned on this system can be saved in the HDD of the machine.
A job printed from a printer driver, etc. can be saved in the HDD of Image Controller.
Q. Can I Check the Printer Font?
A. Yes, you can.
You can check the list of installed fonts. For details, refer to [Fonts].
Q. Can I Print the Original Upside Down?
A. Yes, you can.
To use PS Plug-in Driver for printing:
- Configure the setting on the [Layout] screen. For details, refer to [Rotate].
Q. Can I Cut Paper to Business Card Size for Finishing?
A. Yes, you can.
You can perform cutting for finishing. For details, refer to Before Card Cutting or "Let's try to do cut printing" in [Print Workflow].
Tips
- Cutting requires Trimmer Unit TU-510.
Q. Can I Combine Multiple Jobs Into a Single Job for Printing?
A. Yes, you can.
You can combine hold jobs and print them as a single job. For details, refer to [Combine].
Q. If the Setting of the Combination Source Job Is Changed After Jobs Were Combined, Is the Changed Setting Applied to the Combined Job?
A. The setting is not applied to the combined job.
The combined jobs are stored as a new hold job.
Q. When Will Hold Jobs Not Be Received?
A. When the number of hold jobs reaches the maximum, the next hold job is not received. Delete unnecessary hold jobs, and then store a job again.
For information about the upper limit of hold jobs, refer to What Is the [Hold Job]?.
Tips
- You can configure the setting so that when the number of hold jobs reaches the maximum, the next hold job is received and the oldest job is automatically deleted. Contact your service representative.
- Even if the number of hold jobs does not reach the maximum, the next hold job may not be received depending on the remaining HDD capacity. In this case, delete unnecessary jobs, and store the job again.
in the upper-right of a page, it turns into 
and is registered as a bookmark.