Mode Memory: Registering Store Settings

Use Mode Memory to store up to 30 frequently used job settings, which can be recalled at any time. The stored jobs can be given alphabetical names. For details about the recall function, refer to Recalling a job from the HDD.

Follow the procedure below to register the save job setting.

• preconditionAvailable settings: Print Side, Quality Adjustment, Scan Size, Zoom Setting, Application

• preconditionStored job is given a job number (from 01 to 30) and alphabetical name (dispensable).

• preconditionA maximum of 30 save programs can be registered.

1. Press STORE.

   The STORE screen is displayed.

2. Set save conditions as desired.

3. Press Mode Memory on the control panel.

   The Store Mode Memory screen is displayed.

4. Press Store.

   The screen that shows the settings is displayed.

5. Review the settings to be stored.

   • supplementary explanationTo change the settings to register, press Cancel on the screen that shows the settings, and then press Cancel on the Store Mode Memory screen. The display returns to the STORE screen. On the STORE screen, change recall conditions.

   

6. Press OK.

   The Job store mode screen is displayed.

7. Press the desired job key, then press OK.

   The Job Name Setting screen is displayed.

   • supplementary explanationButton name
     Not displayed: No scan conditions are registered.
     Displayed: Scan conditions are registered.

   • supplementary explanationLock icon []
     Not displayed: Scan conditions can be registered by overwriting.
     Displayed: Scan conditions cannot be registered.

   

8. Enter a job name, then press OK.

   • supplementary explanationYou can enter up to 16 one-byte characters (8 two-byte characters) for the job name.

   • supplementary explanationPress OK to return to the Store Mode Memory screen. The job button displays the entered job name.

   • supplementary explanationFor details about how to enter characters, refer to Inputting Characters.

   • supplementary explanationBe sure to input a job name. The job name must be inputted to return to the Store Mode Memory screen by pressing OK.

   

9. Press OK on the Store Mode Memory screen.

   The display returns to the STORE screen.