Loading tab paper into Main Body Tray.

Example: 3 tab papers are inserted into one finished set

Loading orientation

Stacking order

Finished set

Example: 3 tab papers are inserted into each of 3 finished sets (a total of 9 tab papers)

Loading orientation

Stacking order

Finished set

  1. Withdraw the tray to be loaded with tab papers.

    Withdraw the tray specified for a tab paper size.

  2. Open the feed roller.

  3. Load tab papers into the tray.

    • supplementary explanationPlace tab papers on the main body tray referring to the illustration shown above.

    NOTICE

    • Do not load above the limit level indicated on the side guide plate of the tray and the paper control lever at the air nozzle.

  4. Move the side guide plates to the edge of tab papers.

    • supplementary explanationAlign the tab papers to the feed roller side of the tray.

    • supplementary explanationPress the lock release lever of the front side guide plate to move the guides, and also move the rear guide plate to the edge of tab papers.

    NOTICE

    • Be sure that the side guide plates and rear guide plate are securely aligned to the paper. Otherwise, the machine cannot detect the correct paper size, and machine trouble may be caused.

  5. Push in the tray until it locks into place.