Paper size does not match / Load $####### paper in tray$ / Details can be confirmed with [Confirm Details]
Cause and Action
When a tray is specified for the received print data, if the paper size of the specified tray does not match print data, the machine stops temporarily.
Two methods are provided to restart printing.
Tips
If you set Software Switch No. 73 on, you can temporarily save data on the HDD without entering the wait mode depending on the printer driver.
For details about Software Switch, refer to Software Switch Setting.
Loading the correct size of paper
Load the correct size of paper into the specified tray.
The message Press [Start] to restart is displayed.
Press Start on the control panel.
The machine resumes printing.
Forcibly printing data
Use a desired tray to start printing, regardless of the paper setting required by the print data.
Tips
The tray selected for forced output will be used until that job is completed.
Press Confirm Details.
A dialog will be displayed.
Press a tray key to be used and then press Forced Output.
The screen returns to the MACHINE screen and displays the message Press [Start] to restart.
Press Start on the control panel.
Paper will be fed from the tray selected in step 2 to start the printing operation.