Overview of Z-Folding

Mount Folding Unit FD-503, and then finish the PDF document with Z-Fold.

Example Introduced in This Section

Folding Unit FD-503 is required (refer to Folding Unit FD-503).

Tips

  • Z-Fold can be used in combination with a punch that makes punch holes in the printed paper.

  • If the optional Finisher FS-532 has been mounted, it can be used in combination with the staple for the printed paper.

Intended Environment

Operating system

Windows 7

Application

Adobe Acrobat Reader DC

Printer driver

PS Plug-in Driver

Image Controller

Built-in image controller

Mounted finisher

Folding Unit FD-503

* The sample screen may be different from the actual display depending on your system environment and application version/revision.

Workflow

Setting printer driver

Checking the finishing

Check the finishing of the printed document, then make adjustments with reference to the link if needed.

Recommended Combination

  • Stamp: You can insert Date/Time, Page Number and Copy Number in each page at the time of printing. (Stamp tab of the printer driver. Refer to Stamp Screen.)

  • Sort/Group: When printing two or more sets, you can output by set or by page. (Finishing tab of the printer driver. Refer to Finishing Screen.)

  • 1-sided or 2-sided print on a page basis: You can set 1-sided or 2-sided print for each page. (Page Settings tab of the printer driver. Refer to Page Settings Screen.)

  • Punch: Make punch holes in papers at the time of printing. (Finishing tab of the printer driver. Refer to Finishing Screen.)

Precautions

  • Prior to printing, make sure of the following when performing setting and operation.

  • Load the papers and configure the paper settings (refer toSetting Paper in a Paper Tray/Paper Setting/Registering or Deleting a Paper Profile)

  • To adjust the image positions of front and back sides of printing, make pre-output image quality adjustments. For details, refer to Both-Side Adjustment Flow.

  • If you cannot set this function, make sure that the optional device has been correctly mounted.

  • Match the original orientation and the orientation of the paper in the paper tray.