What Is the [Trimmer Profile]?

Mounting the optional Trimmer Unit TU-510 enables you to perform processing such as Four Edge Trim for trimming around the target, Multiple Cutting for cutting to 2 sheets, and Card Cutting for cutting to the card size. A trimmer profile is a function that pre-registers the advanced settings of the above processing, and recalls and uses the desired one as necessary.

Set the detail of the cut type, cutting amount, and cut position to suit the cutting shape.

The following cut types are available.

In the descriptive illustrations, solid lines represent trims and dotted lines represent creases.

Cut type	Description	Available paper size
[Four Edge Trim]	Cuts four sides of paper.	140.0 mm e 153.0 mm to 330.2 mm e 1300.0 mm / 5.512" e 6.024" to 13.0" e 51.181"
[Multiple Cutting]	Cuts paper to 2 sheets.	299.4 mm e 440.0 mm to 330.2 mm e 487.5 mm / 11.787" e 17.323" to 13.0" e 19.193"
[Card Cutting]	Cuts paper to the card size.	287.0 mm e 370.0 mm to 330.2 mm e 457.2 mm / 11.299" e 14.567" to 13.0" e 18.0"
[Advanced Setting]	Sets the cut position and crease position.	210.0 mm e 143.0 mm to 330.2 mm e 487.7 mm / 8.268" e 5.63" to 13.0" e 19.201"