[CUT SETTING]
Overview
Arbitrarily set the finishing size for cutting, the cut positions at the lead edge and upper edge, and the cut width. The numeric values at the rear edge and lower edge are calculated automatically.
When attaching creases, also set their positions.
a: [Finished Size(Height)]
b: [Finished Size(Width)]
c: [Lead Edge]
d: [Upper Edge]
e: [Cut Width(crosswise)]
f: [Cut Width(lengthwise)]
g: Crease position
Specifications
Category | Device Management, Print Workflow, Copy / Scan | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | Web Connection | ||
Required options | All the following optional devices are required. Trimmer Unit TU-510 Job Separator JS-507 | ||
Required items | - | ||
Setting items | [Finished Size(Height)] | Sets the height and width of the finishing size. Set the value to 85 mm / 3.346" or more. Unit: 0.1 mm / 0.004" | |
[Finished Size(Width)] | Sets the width of the finishing size. Set the value to 133 mm / 5.236" or more. Unit: 0.1 mm / 0.004" | ||
[Lead Edge] | Sets the cut position at the lead edge using the value from the lead edge of paper. Set the value in the range of 10 mm to 13 mm / 0.394" to 0.512", and also set the cutting amount at the rear edge in the range of 10 mm to 13 mm / 0.394" to 0.512". The rear edge position is automatically calculated from the paper size (widthwise), finishing size (width), lead edge position, and gutter slit width (vertical direction). Rear edge position = Paper size (widthwise) - Finishing size (width) - Lead edge position - Gutter slit width (vertical direction) Unit: 0.1 mm / 0.004" | ||
[Upper Edge] | Sets the cut position at the upper edge using the value from the upper edge of paper. Set the value in the range of 8.0 mm to 26.0 mm / 0.315" to 1.024", and also set the difference between the upper and lower edge positions in the range of 10 mm / 0.394". The lower edge position is automatically calculated from the paper size (lengthwise), finishing size (height), upper edge position, and gutter slit width (horizontal direction). Lower edge position = Paper size (lengthwise) - Finishing size (height and width) - Upper side position - Gutter slit width (horizontal direction) Unit: 0.1 mm / 0.004" | ||
[Cut Width(crosswise)] | Sets the cut width of the horizontal direction. Fixed to 8.0 mm / 0.315". | ||
[Cut Width(lengthwise)] | Sets the cut width of the vertical direction. Set the value in the range of 0 mm / 0" or 5 mm to 13 mm / 0.197" to 0.512". Unit: 0.1 mm / 0.004" | ||
Crease position | Set the crease position. Up to 5 creases can be set. Leave a space of 60 mm / 2.362" or more from the lead or rear edge, and set the crease interval to 1.0 mm / 0.04" or more. When 2 pages are imposed by cutting in the horizontal direction, up to 2 creases can be specified. Unit: 0.1 mm / 0.004" | ||
[Disabled] | Clear this check box to set a crease position or [Cut Width(lengthwise)]. | ||
[Complete] | Creates a trimmer profile with the specified value. | ||
[Cancel] | Cancels the setting, and returns to the previous screen. | ||
Remarks | - | ||
Reference | - | ||
Screen access | Touch panel - [MACHINE] - [Trimmer Profile] - [Create] - Select [Advanced Setting]. - [OK] | ||
Touch panel - [MACHINE] - [Trimmer Profile] - Select a trimmer profile for Advanced Setting. - [Edit] | |||
Web Connection - Login screen - [Finisher Manager] - [TU-510 Profile Manager] - [Create] - Select [Advanced Setting]. - [OK] | |||
Web Connection - Login screen - [Finisher Manager] - [TU-510 Profile Manager] - Select a trimmer profile for Advanced Setting. - [Edit] | |||
in the upper-right of a page, it turns into 
and is registered as a bookmark.