Function Overview
- Function Overview
- Adjustment Menu
  - Adjustment Items
[Quality Adjustment]
[Machine Adjustment]
- [Printer Adjustment]
- [Scan Adjustment]
- [LPH Adjustment]
  - [Gap Adj. Between LPH Chips]
[Finisher Adjustment]
- [Staple Finisher(Main) Adj.] (Finisher FS-532)
- [Staple Finisher(Fold) Adj.] (Finisher FS-532)
- [Staple Finisher(Punch) Adj.] (Finisher FS-532)
- [Staple Finisher(PI) Adj.] (Finisher FS-532)
  - [PI Registration Adjustment]
- [Staple Finisher(Main) Adj.] (Output Tray OT-510)
- [Multi Folder(Punch) Adj.] (Folding Unit FD-503)
  - [Paper Width Adjustment]
  - [Punch Vertical Position Adj.]
- [Multi Folder(Fold) Adj.] (Folding Unit FD-503)
- [Stacker Adjustment] (Large Capacity Stacker LS-506)
  - [Paper Width Adjustment]
  - [Paper Length Adjustment]
- [Saddle Stitcher Adjustment] (Saddle Stitcher SD-506)
- [Saddle Stitcher Adjustment] (Saddle Stitcher SD-513)
- [Perfect Binder Adjustment] (Perfect Binder PB-503)
- [Relay Stacker Adjustment] (Relay Unit RU-510)
  - [Paper Width Adjustment]
  - [Paper Length Adjustment]
[ADF Adjustment]
[Size Memory Recovery Mode]
[Charge Manual Cleaning]
[Drum Memory Recovery Mode]
[Drum Refresh Mode]
[Gamma Automatic Adjustment]
[Toner Refresh Manual Adj.]
[CL Blade Cleaning Mode]
[IQ Detected Result]
[IQ Function Setting]
[Memory Status]
[Both Sides Adjust]
Adjusting the Finishing
- Image Quality
  - Adjusting Tone Curves
  - Changing the Screen
- Adjusting the Margin between Pages
  - About Book Spread Printing
  - Gutter Adjustment
- Adjusting the Staple Positions
- Adjusting Misalignment or Tilt of the Punch Hole Positions
- Adjusting the Half-Fold Position of a Booklet
- Adjusting Misalignment, Skew, and Protrusion of a Perfect-Bound Book
- Adjusting the Folding Positions

About Punching

Using the touch panel of the main body, you can adjust the punch vertical position (crosswise direction), the punch horizontal position (paper feed direction), and the tilt of punch hole.

Adjusting the Punch Vertical Position (Crosswise Direction)

Adjusting the Punch Horizontal Position (Paper Feed Direction)

Adjustment for the tilt of punch positions