Registering Color Sensor Adjustment Data for Each Paper Type

Set the paper type and screen for the color sensor adjustment data for each paper type, and then output the chart from the machine.

• supplementary explanationFor details, refer to Printing the Chart.

Measure the colorimetric data for the chart using a spectrophotometer.

Register the colorimetric data to the machine, and then register the color sensor adjustment data for each paper type.

• supplementary explanationThere are two ways to register the colorimetric data.
  - Registering colorimetric data using a USB flash drivetoRegistering Colorimetric Data Using a USB Flash Drive
  - Registering colorimetric data via WebtoRegistering Colorimetric Data via Web

Press Adjustment on the MACHINE screen to display the Adjustment Menu screen.

Press Quality Adjustment and Color Density Control in sequence.

The Color Density Control screen is displayed.

Press Each Paper Type Color Adj..

Select any row from Each Paper Type Color Adjustment List, and press Print Mode.

toWhen i1iSisXL is used: Without QR code

toWhen FD-9 is used: With QR code

Enter a name for the Each Paper Type Color Adjustment, and then press OK.

Press Quality Adj..

Press right on the right side of Screen Pattern to display the desired screen.

• supplementary explanationAlso, you can select any desired screen after pressing Screen Pattern to display the Screen Pattern screen. Select a screen, and press OK.

• supplementary explanationPress Close on the Quality Adjustment screen.

Select a tray to output the charts.

• supplementary explanationPress Output Setting to display the Output Setting screen.

• supplementary explanationSelect the desired output tray by pressing its key, and press OK.

Select the paper size.

• supplementary explanationSelect the tray on the PRINT MODE screen.

Press Start on the control panel.

• supplementary explanationThe machine prints the charts of the size selected in step 9.

Press Exit PrintMode.

• supplementary explanationThe machine is in a busy state to load the colorimetric data with the name entered for the color sensor adjustment data for each paper type in step 5.

Scan multiple charts, which are output based on the steps shown in Printing the Chart, using spectrophotometer FD-9, i1iSisXL, i1Pro/i1Pro2, or FD-5 BT, and create colorimetric data.

Set the path /PRESS_6136/ADJUST_DATA to a USB flash drive, and save the colorimetric data in the lowest folder.

Connect the USB flash drive, in which the colorimetric data is stored, to the USB port of the machine.

• supplementary explanationThis port is available for low-power devices only. Please provide an external supply of power for devices that require a large amount of power.

Press the USB Flash Drive on the Each Paper Type Color Adjustment List screen.

• supplementary explanationFor the registered number, Waiting measured data loading is displayed.

• supplementary explanationThe multiple colorimetric data saved in the USB flash drive in step 2 is displayed on the Colored Data File Select screen.

Select one file.

The machine starts loading all the related files.

Press OK on the Colored Data File Select screen.

The screen returns to the Each Paper Type Color Adjustment List screen.

Press Return.

The screen returns to the Color Density Control screen.

Scan multiple charts, which are output based on the steps shown in Printing the Chart, using spectrophotometer FD-9, i1iSisXL, i1Pro/i1Pro2, or FD-5 BT, and create colorimetric data.

Access to Web Utilities (URL shown below) from the computer connected to the machine via the network.

http://a.b.c.d:30091/

• supplementary explanationEnter the IP address of the machine into a.b.c.d.

Click Machine Manager Setting, and enter the administrator ID and password.

Click on ColorMeasuring data Input.

Enter the file name for colorimetric data into File Name, click Browse on the side of the file path, and select the colorimetric data saved in the Computer.

• supplementary explanationWhen there are multiple colorimetric data items, repeat this step.

Click Upload.

Colorimetric data is saved on the machine.

Press Each Paper Type Color Adj. on the Color Density Control screen to display the Each Paper Type Color Adjustment List screen.

Press Engine Archived Data.

• supplementary explanationFor the registered number, Waiting measured data loading is displayed.

• supplementary explanationMultiple sets of colorimetric data registered via Web is displayed on the Colored Data File Select screen.

Select one file.

The machine starts loading all the related files.

Press OK on the Colored Data File Select screen.

The screen returns to the Each Paper Type Color Adjustment List screen.

Press Return.

The screen returns to the Color Density Control screen.

Press Adjustment on the MACHINE screen to display the Adjustment Menu screen.

Press Color Density Control.

Press Each Paper Type Color Adj..

Select the row you want to delete from Each Paper Type Color Adjustment List, and press Delete.

Press Yes.

The selected color sensor adjustment data for each paper type is deleted.