Overview of Copy
- Overview of Copy Function
- Available Operations for Copy Function
Copy Specifications
Copy Operations
- Basic Copy Procedure
- [COPY] Screen
- Positioning the Original
  - Positioning the Original in ADF
  - Positioning the Original on Original Glass
- Setting Print Quantity
  - Setting Print Quantity
  - Changing entered print quantity
- Stopping Job Currently in Process of Scanning/Printing
Copy Original Setting
- [Original Setting]: Setting the Original
- [Direction]: Setting Direction of Original
- [Separate Scan]: Handling Scanned Original as Single Job
Copy Image Setting
- [Quality Adjustment]: Adjusting the Quality of the Copied Image
- [Zoom] : Setting Copy Zoom
Copy Application Setting
- [Application]: Setting to Match Finishing
Copy Output Setting
- [Simplex/Duplex]: 1-Sided Copy and 2-Sided Copy Settings
- [Output Setting]: Output Paper Setting
Paper Setting
Finishing Settings Using the Mounted Optional Devices
Checking the finishing
Adjustment of this Machine
Useful Copy Functions
- Interrupt: Interrupting Copy Job
- Registering copy settings in the program
- Reserving a job setting
  - Reserving a job setting
  - Reserving Copy Jobs during Warm-up
- Continuing Job on Following Day
- Store Setting: Holding the Scanned Copy Job on this Machine or Saving it on the HDD
Adjusting the Finishing

About Folding Unit FD-503

With Folding Unit FD-503 mounted, the following fold and punch patterns are available.

Fold:

Six folding types are available; Z-Fold, Tri-Fold-in, Tri-Fold-out, Double Parallel, Gate, and Half-Fold. Specify the print side (Outside Print or Inside Print) for each fold mode except Z-Fold.

Original	Output
	Z-Fold		Tri-Fold-in		Tri-Fold-out
			Outside Print	Inside Print	Outside Print	Inside Print

	Double Parallel		Gate		Half-Fold
	Outside Print	Inside Print	Outside Print	Inside Print	Outside Print	Inside Print

Punch:

Punches 2, 3 or 4 holes in printed sheets for filing purposes. Specify the desired punch position (left/right/top) according to the original set direction.

Original	Output
	2-Hole Punch
	Left	Right	Top

	3-Hole Punch
	Left	Right	Top

	4-Hole Punch
	Left	Right	Top

Item	Description
Number of punch holes	Metric area: 2 holes, 4 holes Inch area: 2 holes, 3 holes
Hole diameter	2 holes: 6.5 mm plus or minus 0.5 mm / 0.26" plus or minus 0.02" 3 holes: 8.0 mm plus or minus 0.5 mm / 0.31" plus or minus 0.02" 4 holes: 6.5 mm plus or minus 0.5 mm / 0.26" plus or minus 0.02"
Hole pitch	Metric area: 2 holes: 80 mm plus or minus 0.5mm / 3.15" plus or minus 0.02" 4 holes: 80 mm plus or minus 0.5mm / 3.15" plus or minus 0.02" Inch area: 2 holes: 70 mm plus or minus 0.5mm / 2.76" plus or minus 0.02" 3 holes: 108 mm plus or minus 0.5 mm / 4.25" plus or minus 0.02"
Paper Size	A3 short edge feed to A5 long edge feed
Paper weight	62 g/m² to 128 g/m² / 16 lb Bond to 33 lb Bond

Be sure that the side guide plates of the source tray are securely aligned to the paper loaded in that tray. Otherwise, copies may not be punched in position.

If ATS (automatic tray switch) functions while punching operation is in progress, punch holes may be off the position.

Punch mode is unavailable for paper sizes other than standard (Detect Size Setting, Custom, Tab paper).

When Folding Unit FD-503 is used as a single finishing option, the primary (main) tray and multi folder tray are available to be allotted with output modes as described below.

Tray	Output mode
Primary (main) tray	Half-Fold, Z-Fold, Punch, not processed (straight delivery)
Folder tray	Tri-Fold-in, Tri-Fold-out, Double Parallel, Gate

Reference

The secondary (sub) tray is also available in place of the multi folder tray. Contact your service representative.

For details, refer to each of the following pages.