Overview of Copy
- Overview of Copy Function
- Available Operations for Copy Function
Copy Specifications
Copy Operations
- Basic Copy Procedure
- [COPY] Screen
- Positioning the Original
  - Positioning the Original in ADF
  - Positioning the Original on Original Glass
- Setting Print Quantity
  - Setting Print Quantity
  - Changing entered print quantity
- Stopping Job Currently in Process of Scanning/Printing
Copy Original Setting
- [Original Setting]: Setting the Original
- [Direction]: Setting Direction of Original
- [Separate Scan]: Handling Scanned Original as Single Job
Copy Image Setting
- [Quality Adjustment]: Adjusting the Quality of the Copied Image
- [Zoom] : Setting Copy Zoom
Copy Application Setting
- [Application]: Setting to Match Finishing
Copy Output Setting
- [Simplex/Duplex]: 1-Sided Copy and 2-Sided Copy Settings
- [Output Setting]: Output Paper Setting
Paper Setting
Finishing Settings Using the Mounted Optional Devices
Checking the finishing
Adjustment of this Machine
Useful Copy Functions
- Interrupt: Interrupting Copy Job
- Registering copy settings in the program
- Reserving a job setting
  - Reserving a job setting
  - Reserving Copy Jobs during Warm-up
- Continuing Job on Following Day
- Store Setting: Holding the Scanned Copy Job on this Machine or Saving it on the HDD
Adjusting the Finishing

Overview of Tandem Mode

Tandem mode enables two machines (This MFP and Partner MFP) to work in tandem for the purpose of distributing output conditions of multiple copies ordered on This MFP. Two units working in tandem provide faster completion of large amounts of output.

The two machines should be connected in either way described below.

Connect the two machines directly using a network cable.
In this case, other network functions provided to the machine will be unavailable.
Connect each of the two machines to the hub in a network using the network cable.

NOTICE

Tandem connection is only available between the same models.

Reference

The tandem mode requires a service setting. Contact your service representative.

Notes on connecting machines:

Optional configuration for This MFP and Partner MFP	Two machines should have the same optional configuration to activate the tandem mode.
Tandem connection status	Press Tandem on the Output Setting Screen to display the Tandem Setting Screen, and then select ON for the machine to be This MFP, so that the two machines will turn into the tandem mode.
Paper information on the trays of This MFP and Partner MFP	Two machines in the tandem mode provides This MFP key and Partner MFP key on the Paper Tray indication of the Machine Screen. Pressing This MFP on either machine displays the information on paper specified for the trays of This MFP. Similarly, pressing Partner MFP on either machine displays the information on paper specified for the trays of Partner MFP.
Setting output conditions, scanning the original, and starting an output job	Select copy (output) conditions, scan the original, and start printing on This MFP while activating the tandem mode.
Auto Reset	Auto Reset normally functions on the machine in tandem mode. Tandem mode is initially set to be released if Auto Reset is activated on This MFP.
Output of stored data	Stored image data can be output in tandem mode.
Turning on/off the Enhanced Security mode	Tandem mode is unavailable if the Enhanced Security mode is activated.